How do I connect Mevo to wireless?

First, make sure both Wi-Fi and Bluetooth on your mobile device are enabled. Launch the Mevo 2.0 app. On the bottom right of the card, tap the Configure Mevo button. Now that your in Mevo Network Settings you can select your desired Wi-Fi Network.

Why is my Mevo not connecting?

Turn your mobile device's Bluetooth off, then turn it back on. The camera uses Bluetooth to find nearby devices and check connection/usage status between the mobile device and the camera. If the Bluetooth signal gets interrupted, the communication between devices can fail. Restarting it has resolved this in the past.

Does Mevo start wireless?

Mevo Start can operate completely wirelessly thanks to its WiFi connectivity and built-in battery. For live streams longer than six hours, or where a wired network is available, we do offer USB-C and Ethernet solutions for greater efficiency.

Does Mevo need WiFi?

If you do not have a local Wi-Fi network, you can connect your Mevo camera to the Mevo app through the camera's access point (AP) mode, then stream over your mobile device's 4G-LTE connection.

How do you update WiFi on Mevo?

If you have already connected to your camera, you can go into settings to change your connection method. Tap the More Options icon, then tap the gearwheel to enter settings. Tap Network. Tap Disconnect to change my Mevo Cameras Wi-Fi network.

How do I find my Mevo IP address?

Once Mevo is connected, tap the Info (i) icon to the right of the network name. Select the Manual IPv4 tab; below this is the IP address, which will be four numbers separated by periods. You can also get Mevo's IP address from other network admins tools such as your Wi-Fi router or DHCP server.

How do I use Mevo live on Facebook?

Once your camera is connected to the Mevo app, you should notice a red button in the bottom left corner of the picture. To log in and stream to Facebook Live, tap this red button, then tap the Facebook Live icon. Facebook will open in a browser window and request that you log in and authorize permissions for Vimeo.

How do you turn on Bluetooth on Mevo?

If you launch the Mevo app but do not have Bluetooth enabled, the app will prompt you to turn it on. Tap Settings. You will be redirected to the Bluetooth settings menu. Toggle the switch to On.

Can you use Mevo without a phone?

You must have the Mevo app or Multicam App in order to use the camera. However, once NDI or Webcam Mode modes are enabled the camera can connect and stay connected to your computer without the app running.

How do you hardwire a Mevo camera?

Connect to Ethernet with Boost

1. First, ensure your camera is turned on and in hotspot mode.
2. To connect Boost to the Internet via Ethernet, simply take an Ethernet cable connected to your modem and plug it into the Ethernet port under the weatherproof flap.
3. Connect your Mevo App to your Camera via Hotspot.

How do I turn on my Mevo Start?

Turn On: Simply press and hold the power button on the top of the camera for around 2 seconds. The battery light will flash indicating the current battery level, then a white boot animation will begin and you will hear a short beep.

How do you stream on Mevo Start?

Once your Mevo camera is connected to the Mevo mobile app, you should notice a red button in the bottom left corner of the picture.
...
From here, you can:

1. Toggle the chat display on and off.
2. Choose your streaming quality (up to 1080p).
3. Tap Go Live to start your stream.

Does Mevo work with Zoom?

As of July 27th, 2020, you can now use your camera as a web camera. This enables you to use any of your Mevo cameras with your favorite software. e.g. Video conferencing software such as Zoom, Google Meet, and Discord or Video Switching software like Livestream Studio, vMix, and OBS.

Does Mevo work with StreamYard?

Download and install the Mevo Wireless Webcam application here. Open the application which you'll then be able to find on your top Menu Bar with the Mevo Start icon. You're now ready to use your camera in StreamYard.

Why does my Mevo keep disconnecting?

If the communication between the Mevo mobile app and the Mevo camera is interrupted (e.g. mobile device battery completely drains), by default your recording and stream will continue at a wide shot until you can reconnect your device to the camera.

How do I connect my Iphone to Mevo?

Launch the Mevo app and tap the blue Connect button. A pop-up alert will appear prompting you to update your network settings. To connect to the Mevo hotspot, select Change Wi-Fi On Phone Change Wi-Fi On Phone. network to which your mobile device is connected.

Which is better Mevo start or Mevo plus?

The battery life of the Mevo Start will last up to 6 hours while the Mevo Plus is only up to one hour or 10 hours with the Mevo boost but again, that's a pretty big extra battery to carry around.

Does Mevo camera record?

You can record your live event with your Mevo without streaming. Your recording will capture your live edits. You can later upload your recording to YouTube, Livestream, Facebook, or any other video hosting service.

Does Mevo have a desktop app?

The Mevo app is only available on iOS and Android mobile devices. There is currently no desktop application or software for controlling Mevo camera.

Can Mevo stream to YouTube and Facebook simultaneously?

Livestream have announced the Mevo Plan which allows you to stream to multiple destinations at the same time including YouTube, Facebook Live, Periscope (Twitter) and Twitch - there are a few restrictions such as Facebook which won't allow you to stream to multiple destinations other than Livestream.

How do I change my Facebook account on Mevo?

Close Safari and launch the Mevo app. Once you are connected, tap the red button, followed by the Facebook Live logo. You will then be prompted to log into a Facebook account. If you are instead prompted to confirm your FB login to your previous account, select the Safari icon on the top right.

Can I control Mevo remotely?

Livestream Studio can accept Mevo as a remote camera source when connected to the same network. Make sure that your Mevo is turned on and connected to the same local network as your Livestream Studio machine.

Can Mevo stream to TV?

No, unfortunately, the Mevo Start and Boost do not have a direct video output (e.g. for projectors, monitors, etc.)