How do you use Dr Fixit?

Method Of Application

1. Charge cement and aggregates to concrete mixer as per the mix design, mix in dry state for 1–2 minutes.
2. Start addition of 75–80% mixing water and mix for 2-3 minutes.
3. Dr. ...
4. Place the concrete or apply plaster, as needed.
5. Cure the applied mortar or concrete as per good construction practices.

How is Dr Fixit applied?

Method of Application :

Fixit Pidiproof LW+ for Every 50 kg of Cement in the Concrete Mortar Mix. The Recommended dose of Dr. Fixit Pidiproof LW+ is Mixed into the Gauging Water, Required to Prepare Concrete or Mortar. The Concrete or Mortar Should be Mixed 2 to 3 Minutes to Thoroughly dispense the Liquid.

Can we mix Dr Fixit with cement?

Avoids cracking. Protect concrete from corrosion. LW+ should be used in concrete, plaster and mortar in all the areas of house. Mix 200 ml of LW+ with every 50 kg bag of cement.

Which Dr Fixit is best for waterproofing?

Dr. Fixit LW+ is another essential waterproofing solution from Dr Fixit. This material is integral for waterproofing of plaster and concrete. Using this product as an additive in cement enhances cementing properties of cement, imparting its higher compressive strength.

Can we mix Dr Fixit with wall putty?

A water based epoxy coating for treating internal dampness on walls and ceilings. It can be also used to fill cracks by mixing with white cement and as putty by mixing with OPC or white cement in high damp areas.

How do you mix Dr Fixit URP 301?

Economical Waterproofing- Mix Dr. fixit pidicrete URP with cement in ratio of 1:1.5 by volume and apply in 2 coats. protective screed is a must.

How long does Dr Fixit take to dry?

Priming. Prime the surface with Dr. Fixit Primeseal diluted with potable water by volume in 2:1 ratio (2 parts primer and 1 part water) and allow it to dry for 2 to 3 hours.

Can we add Dr Fixit in paint?

After priming your walls, you can directly apply Dr. Fixit Raincoat, completely doing away with the need for separate coats of waterproofing and paint. It has a superior sheen, and matches the look of normal, high quality external paints. A deep and thorough surface preparation is a must.

What is Dr Fixit raincoat?

Dr. Fixit Raincoat is an elastomeric solution for damp, seeping and flaking exterior walls that ruin the overall look of your house. It is thicker than the normal exterior paint and does not peel off or crack like normal paints. Dr.

Which paint is best for roof leakage?

Acrylic paint provides excellent waterproofing solution and is best suitable in waterproofing paint for roof & waterproofing paint for terrace, built with rectangular blocks.

What is URP in Dr Fixit?

Dr. Fixit Pidicrete Urp: Roof Waterproofing Product In India.

How do you waterproof a house?

To waterproof your roof or terrace, you have to first prepare it, cleaning through the cracks and the entire area. Use a high-quality crack-fill paste or powder such as Berger Homeshield Crackfill and apply 2 coats (as required) inside the cracks.

How do I apply Dr Fixit Primeseal?

Fixit Primeseal with water in proportion of 2:1 and stir well until a uniform consistency is achieved. commencing to further finish coats. DISCLAIMER The product information & application details given by the company & its agents has been provided in good faith & meant to serve only as a general guideline during usage.

What is the use of Dr Fixit Pidifin 2K?

Dr. Fixit Pidifin 2K is a acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.

What is Dr Fixit Pidifin?

USP: Dr. Fixit Pidifin 2K is a high performance flexible waterproofing membrane, which gives a waterproof coating for your bathrooms, kitchen, small roofs, balconies, terraces, wet areas, chajjas, sloping RCC roofs, and basements. Its a two-component acrylic cementitous waterproof coating for water tanks.

How do you use Dr Fixit in plaster?

To get good bonding between new & old plaster surface, use Dr. Fixit Pidicrete MPB, an acrylic bonding agent. While making plaster, add Dr. Fixit Pidiproof LW+ to impart waterproofing to the plaster.

Is Fixit good for waterproofing?

It is best to use Dr. Fixit Solyseal as a waterproofing barrier for foundations and plinth, which protects against rising dampness. It is easy to apply and also protects the structure against the chemicals in the soil.

How do you use Dr Fixit Roofseal top coat?

Fixit Roofseal Top Coat (diluted with water in the ratio 2:1) as Self Priming - 9 - 10 Sq. mtr / litre. ○ Allow coating to dry for 3-4 hours prior to applying first coat & second coat. of application being the same for both the coats.