Is it easy to shorten golf clubs?

While shortening a golf club is a relatively easy process once you know the steps, it should be done by an experienced club builder or golf club fitter for best results. However, over time you can learn the steps needed for this golf club alteration, which can be helpful if you plan on playing golf for many years.

How much does it cost to shorten my golf clubs?

Expect to pay anywhere between $40-$100 reshafting a graphite shaft, if the shaft is steel expect to pay anywhere between $20-$75 per shaft, every replacement shaft needs a new grip which costs $8-$15, and labor costs $5-$35 depending on where you live.

Can you shorten your own golf clubs?

If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.

Is it bad to shorten golf clubs?

Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.

Are shorter irons easier to hit?

Long irons are considerably harder to hit than short irons, and it is good to have a general understanding of this concept. The more prepared you are to take on these long iron shots, the better your chance for success.

What if my clubs are too long?

5 Signs Your Golf Clubs are Too Long

You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.

How do you adjust length of golf clubs?

To avoid cutting the shaft or adding an attachment, purchase a new shaft at your desired length. Cut the ferrule and remove the clubhead from the old shaft as you did before trimming the tip. If you wish to keep the original grip, use an air compressor to separate it from the old shaft, then pull the grip off.

Does club length matter in golf?

When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect.

Can you get new shafts on irons?

When it comes time to reshaft your clubs, you might be inclined to do it yourself. But if you're unfamiliar with the process, you can visit the Golf Services PROS at your local DICK'S Sporting Goods to get help with the repair. Their Certified Fitters can match you with a new shaft that best complements your game.

How much do shafts cost?

A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like. The cheapest shafts you can get are somewhere around 10 bucks each.

How long should my irons be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

How do I know if my golf clubs are the right size?

To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.

Do golf irons wear out?

Golf irons will go dead and wear out over time as their grooves and clubface deteriorate from repeated use. Golf technology is always rapidly changing, meaning irons that are older than five years of age are likely outdated and won't perform as well as the latest models.

Do pro golfers use shorter clubs?

Most pro golfers use shorter shafts on their drivers than recreational golfers. Is this true? Absolutely true.

Are shorter golf clubs better?

Additionally, shorter length golf clubs can provide more control to the golfer, essentially making the golf club more forgiving. While longer clubs can help increase speed and launch angle, shorter clubs can be easier to hit solid due to the reduction in swing arc.

At what height should you get longer golf clubs?

Your Height

If you are taller than about 6'0”, you will likely need clubs that are a bit longer than normal. The standard golf clubs that come from the manufacturer are typically built to help golfers who are around 5'7” to 6'0”. If you are 6'4”, you can almost guarantee that you will need longer golf clubs.

Should I shorten my long irons?

A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.

Can you add length to golf clubs?

Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts. You may add extenders to your existing shafts or you may replace your existing shafts with longer ones.

Why are golf irons different lengths?

As a club is longer (as well as lighter), then it can be swung faster up to a limit. The increased length provides greater leverage and speed to hit the ball further if solid contact is to be made. Shorter clubs are designed not for length, but rather precision.

How far does Tiger Woods hit a 7 iron?

Tiger Woods is a legend of golf but on average, how long does he hit a 7 iron? Tiger hits his 7 irons approximately 172 yards. This is an average figure and there will times when Tiger hits the ball closer to 200 yards.

How do you change shafts on golf clubs?

Update Your Golf Club With a New Shaft

1. Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. ...
2. Measure the shaft tip. ...
3. After the tip has been trimmed, abrade or roughen the shaft tip. ...
4. Align the shaft graphics the way you want them by rotating the shaft.

How do you Reshaft a golf club driver?

Scrape off the ferrule at the bottom of the club head's hosel with a utility knife. Place the club into a shaft clamp to hold it in place while you work on the head. Use a heat gun to heat up the area around the hosel to soften the epoxy glue that connects the shaft to the club head.