What's the difference between S300 and s400?

s400, some golfers may say that the s400 is stiffer than the s300. Others will say they are the same stiffness, and the only noticeable difference is in the weight. The s400 is meant to be slightly stiffer, but the difference is tough to pick up on.

Is S300 a stiff shaft?

With S300 acting as the “standard” stiff flex, anything that comes in over or below 130 grams is deemed to be a lighter (S200) or heavier (S400) version. True Temper's standard Dynamic Gold steel shaft.

Are True Temper S300 shafts good?

Heavier golf shafts typically go a little lower than lighter golf shafts, and they tend to perform better for those who have faster swing speeds. The most popular of the Dynamic Gold golf shafts made by True Temper is, by far, the S300. This is the shaft that most golfers find to be a good match for their golf game.

Which is stiffer S300 or X100?

Flex: S300 vs X100

The flex of both shafts are different from one another, the S300 being stiff and the X100 being extra stiff. Depending on your play style, the stiffness of one of the shafts is better for you than the other.

What is difference between R300 and S300?

The main difference between the R300 and S300 is the flex. The R300 has a regular flex and the S300 has a stiff flex. This means that the R300 is better for players who have slower swing speeds, whereas the S300 is better for players who have faster swing speeds.

What weight are R300 shafts?

From the late 80's to the early 2000's, the DG X100 shafts dominated the PGA Tour. Its hard to believe that in my earlier golfing days, I could not play the original DG R300's (127 gm) because they felt too whippy and light!!

What is soft stepping irons?

Soft stepping is the term used to indicate changing flex of a taper tip shaft by adjusting the stiffness of a set of irons by putting the lower numbered iron shaft throughout the set. For example, the 8 iron shaft is put in the 9 iron, the 7 iron shaft in the 8 iron and so on through the set.

What are X100 shafts?

X100's are Dynamic Gold Steel shafts made by True Temper () and are Extra Stiff. They are stiffer than S300's. They are the most played iron shaft on the PGA Tour and True Temper Dynamic Gold (R300, S300, S400, X100, etc...) is the #1 shaft played by all golfers.

Should my wedges have the same shaft as my irons?

If you are thinking about getting new wedges, make sure you have the right shafts. What shafts should you play in your wedges? The very short answer is play the same shaft in your wedges as you do in your irons.

What is the difference between tapered and parallel shafts?

The difference between a parallel tip shaft and a taper tip shaft is the tip diameter and shaft weight. All golf shafts taper from the butt to the tip, but parallel tips stop tapering below the last step, while the taper tips, continues to narrow.

Are Dynamic Gold X100 shafts stiff?

X100's are Dynamic Gold Steel shafts made by True Temper () and are Extra Stiff. They are stiffer than S300's.

What Flex is wedge flex?

Wedge flex is actually the same as stiff flex. Wedge flexes are stiff. Some wedges come in lighter with less stiff flexes and some come in heavier. Usually the range between stiffness levels is about 5 grams in weight per shaft.

How heavy should my iron shafts be?

In general, golfers with slower swing speed and tempo can and should play a lighter shaft. Golfers with very fast speeds and tempo should play heavier shafts. Driver shafts typically weigh 55-60 grams for men and 45-50 grams for ladies. Iron shafts can be as light as 55 grams in graphite, and 130 grams in steel.

What shaft is in Vokey wedges?

The stock shaft for the new Slate Blue SM8 is the True Temper Wedge Flex shaft and is fitted with an eye-catching Blue/White/Black Golf Pride grip with the BV (Bob Vokey) wings on display down the front. A new premium finish for the number 1 wedge on Tour.

Should wedge shafts be stiffer?

Who Should Play With Stiff Flex In Their Wedges And Why? Golfers with faster swings are best suited to stiff flex shafts. Any softer flex shafts may cause you to sky shots, and obtain greater levels of spin than you desire.

What is Dynamic Gold VSS?

Dynamic Gold 95 VSS Pro Iron Shafts are a culmination of endless R&D and years of testing from our alloy engineering team. Dynamic Gold 95 is designed as our lightest constant weight offering and our most flexible steel shaft in our entire True Temper line of shafts.

What is Dynamic Gold shaft?

The most successful shaft in the history of golf, Dynamic Gold is a tour-weighted shaft that is designed for players seeking a penetrating ball flight with optimum control and accuracy.

Does hard stepping lower ball flight?

Hard stepping a set of irons

The effect on each club would be that each clubs shaft would be a little bit stiffer than they originally were and produce a slightly lower ball flight. Remember, when you hard step, the club lengths will decrease.

Do longer shafts play softer?

Also, longer clubs should play 1 to 1.5 flexes stiffer than shorter clubs. So, if your driver is S(6.0), your irons should probably be R(5.0), etc. Some golfers swing harder with their drivers so they may need stronger flexes in their longer clubs.

How much difference does soft stepping make?

Soft-stepping twice would be cutting the shaft as a 3-iron or two clubs more and would decrease the stiffness by a half flex. If you soft step once for one club, you will do so on all the irons and wedges to have a uniform progression of flex throughout the set. The downside to soft stepping is two-fold.

What is the lightest steel iron shaft?

The company that gave golfers the first sub-100-gram constant weight steel shaft is now releasing the world's lightest constant weight steel shaft, the N.S.PRO Zelos 6, which checks in at a mere 68.5 grams.

What is the lightest steel shaft?

The company continues its lightweight heritage with its new N.S. Pro Zelos 6, which at 68.5 grams is the lightest constant-weight steel shaft in the market.

What iron shaft should I use?

If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches. 35 to 36 inches = irons should be based on a 5-iron of 38 inches.