Why we use Dr Fixit?

It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and an excellent resistance to the growth of microorganisms.

Can we mix Dr Fixit with cement?

Avoids cracking. Protect concrete from corrosion. LW+ should be used in concrete, plaster and mortar in all the areas of house. Mix 200 ml of LW+ with every 50 kg bag of cement.

Which Dr Fixit is best for waterproofing?

Dr. Fixit LW+ is another essential waterproofing solution from Dr Fixit. This material is integral for waterproofing of plaster and concrete. Using this product as an additive in cement enhances cementing properties of cement, imparting its higher compressive strength.

Can Dr Fixit be used for walls?

Here, you can apply Dr. Fixit Silicon Sealant to fill the gaps and avoid water ingression. It is one of the popular internal wall waterproofing solutions in India, which is UV resistant and highly elastic in nature. Internal walls of your home may experience dampness due to various reasons.

How is Dr Fixit applied?

Method of Application :

Fixit Pidiproof LW+ for Every 50 kg of Cement in the Concrete Mortar Mix. The Recommended dose of Dr. Fixit Pidiproof LW+ is Mixed into the Gauging Water, Required to Prepare Concrete or Mortar. The Concrete or Mortar Should be Mixed 2 to 3 Minutes to Thoroughly dispense the Liquid.

How long does Dr Fixit take to dry?

Depending on the weather, the drying time for Dr. Fixit Newcoat Roof Waterproofing should be 6 to 8 hours between coats.

Can we mix Dr Fixit with wall putty?

A water based epoxy coating for treating internal dampness on walls and ceilings. It can be also used to fill cracks by mixing with white cement and as putty by mixing with OPC or white cement in high damp areas.

What is Dr Fixit raincoat?

Dr. Fixit Raincoat has an acrylic elastomeric coating which gives a thickness of 110 microns. It works harder than normal exterior paint to protect your walls. True to its name, it's also a complete w​aterproofing solution for your exterior walls, without really compromising on aesthetics.

Is Dr Fixit a superplasticizer?

Dr. Fixit Pidicrete CF 205 is a solution of sulphonated naphthalene formaldehyde and additives in water. It is a superplasticising admixture to produce pumpable or flowable concrete with a low w/c ratio.

What is Dr Fixit Pidifin?

USP: Dr. Fixit Pidifin 2K is a high performance flexible waterproofing membrane, which gives a waterproof coating for your bathrooms, kitchen, small roofs, balconies, terraces, wet areas, chajjas, sloping RCC roofs, and basements. Its a two-component acrylic cementitous waterproof coating for water tanks.

What is the use of Dr Fixit Pidifin 2K?

Dr. Fixit Pidifin 2K is a acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.

What causes wall dampness?

Condensation damp is caused by moist air condensing on walls. Warm & moist air comes into contact with a cold surface such as the walls, and the air can't hold the moisture, causing drops of water to appear and causing mold on your walls.

Which is the best waterproofing chemical in India?

10 Best waterproofing materials for Indian climate

• Dr Fixit LEC. ...
• Newcoat and Newcoat Coool. ...
• Bridge Deck waterproofing. ...
• Zentrifix-Elastic. ...
• KEM proof 87. ...
• PeterSeal. ...
• Proofex. ...
• Polyureasystem. Fosroc Chemicals India Pvt.

Which cement is best for waterproofing?

Water Repellent Cement is also called Hydrophobic Cement. A small amount of Hydrophobic surfactants such as stearic acid, boric acid or oleic acid is mixed with the ordinary portland cement during grinding of clinker. Hydrophobic Cement is most suitable for basements and for making water tight concrete.

Which is best waterproofing chemical?

The 7 Best Chemical Waterproofing Methods

1. Grout and Epoxy Injection. ...
2. Vinyl Ester Resin System. ...
3. Polyurethane Liquid. ...
4. Polyurea Coating. ...
5. Bituminous Waterproofing Method. ...
6. Crystallization Waterproofing. ...
7. Permeability-Reducing Admixtures (PRAs)

How do you use Dr Fixit water tank?

All surface cracks, undulations and voids must be repaired appropriately before application. Correctly grout all construction joints using polymer modified mortar using Dr Fixit Pidicrete URP. Surface to be treated with Dr Fixit Fastflex must be in a saturated surface dry condition before application​

What is grouting in bathroom?

Grouting is the process of filling the spaces in between tiles. Most options come in powder form, but premixed containers are available as well. Whichever option you choose, follow the manufacturer's instructions on how to mix grout.

How do you fill gaps in bathroom tiles?

Answer: A single bead of caulk can fill a gap of ¼ inch. If the gap is greater than that, then simply apply to the deeper areas. Then, wait for your caulk to dry. Next, apply another layer of caulk.